M100-200L, 200mm Lever-Lock Wafer Wand

Extreme care is required for the proper handling of wafers.  Careful attention must be paid not to damage and contaminate the wafers while out of their carriers.  Pozzetta Products is excited to now be offering manual wands to handle individual wafers carefully and securely!  The new Lever-Lock Manual Wands allow stable handling and offers remarkable improvement of working efficiency, because the holding force is constant when the wand is in the locked position.  These wands:

• Need no extra effort to keep holding the wafer, unlike manual wands without a lock.
• Ensure stable gripping, safe handling, and improved efficiency.
• Use 2 contact points on the holding surface to minimize contamination to the wafer.
• Are made from PEEK, which has superior strength, heat resistance, and chemical resistance.
• Come in 100mm, 125mm, 150mm, 200mm, and 300mm sizes.

M100-300L 300mm Lever-Lock Wafer Wand

For smaller wafer sizes, our L-Series manual wands are available in 100mm & 125mm, as well as 150mm & 200mm sizes.  They offer the same features and benefits as the Lever-Lock Series, but without the help of the locking mechanism.

E100-125, 125mm Wafer Wand with CNT

CR125-MMF PFA Wafer Carrier

Pozzetta Products offers a wide range of wafer carrier sizes and we have the perfect fit for your 125mm wafers.  Our carriers come in a variety of materials such as:  PEEK, PFA and Antistatic Polypropylene.  The wafer carries each have a capacity of 25 wafers and an H-shaped endwall for equipment interface.  Most of the carriers have wash slots in either the side walls or the end walls for easy cleaning.  Also available are PFA handles for convenient carrying of the wafers.  Contact us to discuss your wafer carrier needs in any size!

CR125A-PPA Antistatic Polypropylene

Wafer Carrier Handle

No touch standoff

No-touch design. The AU standoffs are angled, so only the edges of the substrate are touched and the substrate is suspended.

Features include: Positive locking latch, seal gasket, removable labels, long life hinges, stackable, easy open and close, and excellent access for insertion or removal of masks.

• Single material design.  By using only one material in each box we reduce outgassing variables.
• Slide latch for secure closure and protection during shipping.
• Standoffs securely hold and prevent wafer contact.
• Precision cleaning by Pozzetta Micro Clean delivers you a cleaner part.
• Pozzetta Positive Response confirms your order, your shipment, and our quality.
• Also available in clear material.

Monterey, CA 19-22 September

SPIE Photomask Technology is the premier event for EUV mask making, emerging mask technologies, and the entire photomask industry.

Visit Scott and Artemis at booth # 107

Exhibition Dates and Hours:

Tuesday 20 September Exhibit. . . . . . . . 10:00 am to 4:00 pm

Tuesday 20 September Poster/Reception 6:00 pm to 7:30 pm

Wednesday 21 September Exhibit . . . . . . 10:00 am to 4:00 pm

We are looking forward to exhibiting again this year.

Scott, Collin and Artemis will be waiting for  you so be sure to visit our booth!

Now you can chat live with one of our helpful sales staff or customer service.

Have  question about one of our products?  Let us help you find the right product for your application.

Get product details, pricing and availability.  You can even check your order status.

Hope to hear from you soon!

Conference:  February 27th to March 3rd  2011

Exhibit: Tuesday March 1st and Wednesday March 2nd 2011

San Jose Convention Center
San Jose, California, USA

We look forward to meeting you!

Easy to open and close.

Compact and Stackable.

Available in various materials.

156INTERLEAF

As part of our solar wafer product line and shipping system we offer interleaf wafer separator sheets for 156mm square wafers.

Ideal for use in our PH700-156SW and P2-156SW shipping compacts.